|Miniature spectrometer getSpec 2048 x 14 for UV, VIS and NIR range|
| Request for information|
The getSpec-2048x14 Fiber Optic Spectrometers is a back-thinned type CCD spectrometer with high quantum efficiency and high UV sensitivity. The optical design is based on the getBench-75 symmetrical Czerny-Turner design with a 2048x14 pixels high UV sensitive CCD image sensor. The image sensor is used as a linear array of 2048 pixels binning the vertical 14 pixels to optimize efficiency. The spectrometer has a fiber optic entrance connector (standard SMA, others possible), collimating and focusing mirror and a diffractional grating. A choice of 16 different gratings with different dispersion and blaze angles enable applications in the 200-1160nm range. The getSpec-2048x14 comes with a 16 bit AD converter, and USB2.0 high speed interface.
The getSpec-2048x14 is especially suitable for measuring low light, fluorescence and UV- applications. Digital IO ports enable external triggering and control of shutter and pulsed light sources from the getSpec product range.
The new getSpec-2048x14 has a USB2 interface with fast data sampling of 450 spectra per second and data transfer in 2.24 msec and supports analog in-and outputs as well. Optional BluetoothÒ (-BT) communication and an SD card for on-board saving of spectra can be added. The getSpec-2048x14-USB2 runs on USB power and comes with getSoft basic, a complete manual and USB interface cable. Multiple (up to 127) USB2 spectrometers with different detector types can be externally coupled.
|Optical Bench||Symmetrical Czerny-Turner, 75 mm focal length |
|Wavelength range||200-1160 nm|
|Resolution ||0.04 –20 nm, depending on configuration|
|Stray light ||< 0.1% |
|Sensitivity (getLight-HAL, 8 µm fiber)||16000 counts/µW (16-bit AD) -per ms integration time|
|UV Quantum efficieny||35-65% (200-300nm)|
|Detector ||Back-thinned CCD image sensor 2048x14 pixels |
|Signal/Noise ||500:1 |
|AD converter ||16 bit, 1.5 MHz|
|Integration time ||2.24 msec – 10 minutes|
|Data transfer speed ||2.24 msec / scan |
|Sample speed with on-board averaging ||2.24 msec / scan |
|Interface||USB 2.0 high speed, 480 Mbps or RS-232, 115.200 bps|
|Digital IO ||HD-26 connector, 2 Analog in, 2 Analog out, 3 Digital in, 12 Digital out, trigger, sync.|
|Power supply||default USB power, 350 mA or with SPU2 external 12VDC, 350 mA|
|Dimensions, weight||175 x 110 x 44 mm (1 channel), 716 grams|
Last change 06/19/2008
Copyright (c) getAMO 2021