Informationen in deutsch
Informations en français
Информация на русском языке
FHSA-TTL - Filter and Cuvette Holder with Attenuator and TTL-Shutter
Request for information
The FHSA-TTL-filter and cuvette holder is a well suited tool for various applications in the field of research and development, due to it's variability. Standard cuvettes up to 10 x 10mm can be measured in transmission as well as plane substrates like filters up to 7mm thickness. Lenses coupled to SMA-sockets provide a collimated beam through the sample.
The transmitted light intensity can be adjusted very precice between 0% and 100 % relativ to the maximum using the internal attenuator. So the FHSA-TTL can be used as an optical attenuator in spectroscopic setups.
The electronic TTL-Shutter for dark signal correction can be switched manually or by a TTL-signal. This also allows to automatically correct the spectroscopic setup for dark current drift.
Should you have questions concerning the technical specification; our application scientists will be pleased to consult you.
Technical Specification
Spectral range
200 nm - 1100 nm
Shutter control
manually or by TTL signal max. 5 Hz. / 60 dB
Shutter response time
7 µsec
Repeatability attenuator
0,50 %
Filter holder
Thickness up to 7 mm; round or rectangular
Cuvette holder
for standard cuvettes up to 10 mm x 10 mm
Fiber connection
SMA-connector, with built-in collimating lenses
Power requirements
12 VDC
Weight
approx. 600 g
Dimensions
5,5'' W x 1,97'' L x 1,97'' H
Last change 08/15/2007
Copyright (c) getAMO 2024