Products  
  DO Lab Sensor
   Technical Specification
   Properties
   Advantages
   Connectability
   Measuring Principle
   Request for information
   Request for quotation
  PAT Oxygen Sensor
  LowCost DO Sensor
  Oxygen Trace Range Sensor
  Temperature Sensor
  Software
  Accessories



Distributors wanted





getOtwo 3207 – Optical DO sensor with 12mm shaft for measurements in liquid media



Applications
  • water analysis
  • beverage analysis
  • concentration measurements, e.g. in slurries, oils ...
  • monitoring of processes of oxidation
  • monitoring of filling process

Highlights
  • 12mm shaft out diameter
  • inert POM housing
  • 2 independent oxygen measurement channels in one sensor
  • RS485 with Modbus RTU and 2x 0-5VDC (or 2x 4(0)-20mA for getOtwo 3207 i)
  • IP68 / NEMA 6
  • 120 mm shaft length
  • Spot is pre-calibrated

The state-of-the-art oxygen sensor getOtwo 3207 is based on the principle of fluorescence quenching.
Usual standard electrodes can be replaced due to getOtwo's shaft having an outer diameter of only 12mm.
Long tool life at minimized maintenance efforts guarantee low operating expenses at high measuring safety

  • The first and only system with two separate measurement channels for real-time referencing built into a shaft with 12 mm out diameter
  • Plug-in the sensor directly in fixtures for pH or electrochemical oxygen probes
  • Monitoring of the health status and the status of the sensitive element
  • No corrosion of housing by reason that it is POM
  • Sensitive element placed in robust cap for easy replacement
  • No fragile oxygen membrane or problems coming from electrolyte
  • No oxygen consumption, no cross sensitivity to e.g. CO2, H2S, flow
  • Less maintenance
  • Temperature measurement implemented
  • IP67 / NEMA 6
  • Versatile connection via RS485 and Modbus RTU or Sentronic protocol and 2x 0-5VDC (or 2x 4(0)-20mA for getOtwo 3207 i) and an additionally USB converter
  • Separate trigger and alarm channel
  • Windows based PC-Software inclusive

Request for information
Request for quotation

Order information
TypeDescriptionPN
getOtwo 3207Optical DO sensor with 12mm shaft for laboratory applications, RS485 with Modbus, 2x 0-5VDC output, trigger, alarm channel, Pt100 integrated in the probe tip 2520001101059
getOtwo 3207 iOptical DO sensor with 12mm shaft for semi-process applications, RS485 with Modbus, 2x 4(0)-20mA output, trigger, alarm channel, Pt100 integrated in the probe tip 2520800700132
getOtwo 3208Optical DO sensor with 12mm shaft for laboratory applications, RS485 with Modbus, 2x 0-5VDC output, trigger, alarm channel, Pt100 onto the probe tip for fast temperature response 2520800200113
getOtwo 3208 iOptical DO sensor with 12mm shaft for semi-process applications, RS485 with Modbus, 2x 4(0)-20mA output, trigger, alarm channel, Pt100 onto the probe tip for fast temperature response 2520800800139
getOtwo DIS 5006 Measuring cap for getOtwo 32xx series in PE/PC (0-20mg/l; 0-400mbar) 2520803100120
getAMO CON USBBidirectional converter between USB and RS485, including power booster up to 10VDC for application software 2520800400100
getAMO ACC CxxCable with open ends for getOtwo series. Different length of the cable are available



Copyright (c) getAMO 2017