Products  
  DO Lab Sensor
  PAT Oxygen Sensor
   Technical Specification
   Advantages
   Properties
   Connectability
   Measuring Principle
   Request for information
   Request for quotation
  LowCost DO Sensor
  Oxygen Trace Range Sensor
  Temperature Sensor
  Software
  Accessories

   News
 






Informationen in deutsch





Informations en français





Информация на русском языке




Measuring principle




The principle of flourescence quenching

The emission characteristic of a specific sensitive dye depends on the oxygen concentration of the surrounding medium.

The fluorescence intensity of the dye decreases when it is quenched by molecular oxygen.

Concerning modulated radiations the decay time is modified and respectively the phase of the fluorescence light if the concentration of the surrounding media changes as well.

The relation between the fluorecence intensity and lifetime in the absence (I0, t0) and presence (I,t) of oxygen concentration [O2] is given by the Stern-Volmer equation:
I0/I = t0/t = 1 + KSV [O2]



Principle of fluroescence quenching


Taking oxygen as analyte for example - the curves in the diagram below represent the sensitivity being increased at lower concentrations compared to higher conentrations of the analyte.




Stern-Volmer equation


Principle of measurement of optical oxygen sensors:


Specific and sensitive dyes are generally fixed on permeable membranes. Those may consist of polymeres or Sol gels.

Dyes are stimulated by short-wave light (e.g. blue light) and fluorescence quenching is done in higher wavelength ranges (e.g. red light). Changes in fluorescence lights can be measured using appropriated detectors (such as diode arrays, CCD lines).



Copyright (c) getAMO 2018